This video demonstrates the UTFT library and how the Simulator runs the test sketch. Nov 19, 2013 - Alternatives to the Arduino IDE's built-in Serial Monitor. Tools for Windows, OS X, and Linux which are compatible with all serial-based Arduino.
Type Name Latest commit message Commit time Failed to load latest commit information. Jan 22, 2018 Sep 1, 2018 Sep 1, 2018 Sep 1, 2018 Sep 1, 2018 Feb 14, 2018 Jan 22, 2018 Jan 22, 2018 Jun 17, 2018 Aug 4, 2018 Sep 4, 2018 Jan 22, 2018 Jan 22, 2018 May 22, 2018 Jan 22, 2018 Sep 3, 2018 Sep 3, 2018 Sep 1, 2018 Sep 1, 2018 Sep 4, 2018 Jan 22, 2018 Jan 22, 2018 Jan 22, 2018 Jul 21, 2018 May 19, 2018 Feb 19, 2018 May 12, 2018 Jan 22, 2018 Jan 23, 2018 Jan 22, 2018 Feb 19, 2018 Jan 22, 2018 Mar 4, 2018 Jan 22, 2018 Jan 22, 2018 Jan 22, 2018 Jan 22, 2018 Jan 22, 2018 May 19, 2018 Mar 31, 2018 Sep 4, 2018 Mar 21, 2018 May 21, 2018 Jul 21, 2018 Jun 17, 2018 Mar 3, 2018. SDrive-MAX SDrive-MAX is a new disk drive and tape emulator for Atari 8bit computers based on sdrive-ng ported to arduino and enhanced with a touchscreen display for controlling. So it can work without sdrive software on the Atari, but could be used anyway. Changing disk images during live operation is one of the most important features, i think.
![]()
What do you need? - an arduino UNO with atmega328p - an Elegoo 2,8' TFT-Touchscreen Shield or similar with ILI9341 compatible controller using 8bit parallel mode(i think, that one from the adafruit project is the same). Touchlines must be wired as followed: X+ 8 X- A2 Y+ A3 Y- 9 The other lines are always the same, as far as i could see (TFT-Data 2-9, -Ctrl.
A0-A4, SD 10-13). In doubt, ask! - a diode 1N4148 or similar - a micro SD-Card(SD or SDHC) - some cable and connectors to Atari's SIO-Port - avrdude Software for firmware programming Wirering Arduino Atari-SIO: TXD Pin 3 (Data-In, over the diode, cathode to arduino) GND Pin 4 (Ground) RXD Pin 5 (Data-Out) A5 Pin 7 (Command).
![]()
+5V Pin 10 (+5V/Ready).Optional, if you want power from Atari, but then you can't use Display while Atari ist powered off! Firmware programming: First use the eeprom-writer.hex to set the correct values to the EEPROM! Wait until the writer has done, then programm the SDrive.hex into the flash. Display usage: - on first start follow touching the calibration crosses. You can redo this at any time by hold touching during startup. This have to be also done, if you have changed the display rotation.
press drive buttons in the middle to select the actual boot drive (D1:) (on startup always the internal drive D0: with SDRIVE.ATR loaded is selected for old sdrive(-ng) compatibility) - press drive buttons on the left do deactivate the drive - press dirve buttons on the right at the disk logo to insert an image - D0: can only be selected as boot drive, not changed - press on the New button will create a new image on the selected drive during the next format command - press on the output window at bottom will open SIO debug mode.
Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |